Nastavení viz SwitchDlink3010


Používejte nejnovější firmware. Před přehrátím si zálohujte kjonfiguraci, nebo updatujte hned po vybalení z krabice.

Firmware: V4.00B04 (Runtime), V1.00B03 (Prom)

Release Note

DGS-3024 Firmware Release Note  
Firmware: V4.01.B01 (Runtime), V 1.01-B01 (Prom)
Hardware: A4G
Date: Sep. 19, 2007

Problems Resolved:
1. Fix the problem that when RSTP topology changed, the STP convergence never back to normal.

1. Support new flashes (K8D3216UBC-PI07, K8P3215UQB-PI4B, S29AL032D90TFI04)

Firmware: V4.00B04 (Runtime), V1.00B03 (Prom)
Hardware: A1/A2/A3
Date: July 28, 2006

Problems Resolved:
1. Fix the problem that in certain circumstances, a port (randomly) will stop working.
2. Fix the problem when configuring a STP port which is under forwarding BPDU mode to be a VLAN tagged port, the STP function will not work.
3. Fix the problem after rebooting the Switch, all LACP ports configuration will change to “passive” even administrator did save the configuration before reboot.
4. Fix the compatibility problem with KIWI Syslog server v7.2.27 which the time information in log messages were wrong.

1. STP Loopback Detection
2. Editable Login Banner
3. Editable System Prompt
4. Support per port / per device BPDU filtering
5. RX Bandwidth Control, minimum granularity: 64Kbps.
6. Port description


-- TomT - 19 May 2008

Topic attachments
I Attachment Action Size Date Who Comment
elsehad DGS-3024-4.00-B04.had manage 2204.1 K 2008-05-19 - 10:59 TomT Firmware: V4.00B04 (Runtime), V1.00B03 (Prom)
Topic revision: r1 - 2008-05-19 - 11:02:20 - TomT

This site is powered by the TWiki collaboration platformCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback