-- swiche jsou dodavany uplne bez konfigurace, tudiz se musi alespon IP nastavit pres seriovou konzoli:

-- nastaveni console: -- The baud rate automatically boots up at 38400. Set the data format to 8 data bits, 1 stop bit, and no parity. Set Flow Control to none.

-- nastaveni IP:

-- console> enable

-- console# configure

-- console(config)# interface vlan 1

-- console(config-if)# ip address ip.ad.re.sa 255.255.255.0

-- console(config-if)# exit

-- console(config)# exit

-- console# ip default-gateway ip.ad.re.sa

-- potom nezapomenste konfiguraci ulozit:

-- console# copy running-config startup-config

potom se na switch da dostat a je mozno nastavovat veci libovolne

-- HoBy - 2012-11-19

Topic revision: r1 - 2012-11-19 - 09:45:16 - HoBy
 
This site is powered by the TWiki collaboration platformCopyright &© by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback